Download Manuel d`instructions

Procedure for reversing door opening
Step 9
Step 10
Remove screws from
opposite side (bottom)
• Re-install bottom hinge assembly using
screws removed in Step 9.
• Put in the levelling rings from Step 8
Note: All parts needed for rev erse door swing
assembly are included in the component
bag inside the unit along with the owner’s
manual and the key.
Step 11
Step 12
Remove screws from
opposite side (top)
• Reverse door 180° and re-install
• Re-install top hinge assembly . Make
sure that the door is properly
aligned w ith the cabinet before
tightening the screws.
9/15/2010
21