Download Instruction Manual - Service

ENGLISH
Residual risks
When using a cable reel, always unwind the cable
completely.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These Also refer to the table below.
risks can arise from misuse, prolonged use etc. Even with
Conductor size (mm2)
the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks can
0.75
not be avoided. These include:
1.00
• Injuries caused by touching any rotating/moving parts.
1.50
•
Injuries caused when changing any parts, blades or
accessories.
•
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
Cable rating (Amperes)
6
10
15
2.50
20
4.00
25
Cable length (m)
7.5 15 25 30 45 60
Voltage
Amperes
Cable rating (Amperes)
115
0 - 2.0
6
6
6
6
6 10
2.1 - 3.4
6
6
6
6
15 15
3.5 - 5.0
6
6
10 15 20 20
5.1 - 7.0
10 10 15 20 20 25
7.1 - 12.0
15 15 20 25 25 -
12.1 - 20.0
20 20 25 -
-
0 - 2.0
6
6
6
6
6 6
Date code position (fig. A)
2.1 - 3.4
6
6
6
6
6 6
The date code (13) is printed on the housing of the tool,
which also contains the year of manufacture.
3.5 - 5.0
6
6
6
6
10 15
5.1 - 7.0
10 10 10 10 15 15
For example:
7.1 - 12.0
15 15 15 15 20 20
12.1 - 20.0
20 20 20 20 25 -
•
Impairment of hearing.
•
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
Label on the tool
The following symbols are shown on the tool:
Warning! In order to reduce the risk of injury, the
user must read the manual.
2014 XX JN
Year of manufacture
Electrical safety
Double insulation measures are taken in this power
tool, so no grounding is needed. Please check
whether the voltage of power supplied is consistent with the
voltage on the nameplate or not.
•
If the wire is damaged, it should be replaced by the
manufacturer or a service center authorized by Black &
Decker, to avoid danger.
Using an extension cable
If an extension cable is requred, use an approved extension
cable suitable for the power input of this tool (see technical
data). The minimum conductor size is 1.5 mm2.
6
230
Package contents
The package contains:
1 Impact drill
1 Side handle
1 Depth gauge
1 Chuck key
1 Instruction manual
•
Check for damage to the tool, parts or accessories
which may have occurred during transport.
-