Download BUILT-IN UNIT INSTRUCTION GUIDE

BUILT-IN UNIT OPENING DIMENSIONS
A SMALL ACCESS HOLE IS REQUIRED TO RUN WIRE FROM LED
(LIGHTS) DOWN INTO CAVITY OF CABINET. BATTERY PACK
MUST BE MOUNTED A MINIMUM OF 20cm BELOW BOTTOM OF
GRILL TO PREVENT MODULE FROM OVER HEATING. ENSURE
WIRES AND MODULE DO NOT INTERFERE WITH DRIPPAN
REMOVAL OR COME IN CONTACT WITH BOTTOM OF GRILL.
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON LEFT SIDE OF
GRILL FOR ROTISSERIE USE.
GAS INLET
OPENING
BUILT-IN
SIDEBURNER
W
D
H
4.5cm
D
H
15.5c
4.5cm
m
GAS INLET
OPENING
W
86.5cm
RECOMMENDED
ATER
M
E
L
STIB
U
B
-COM
NON
IAL
MINIMUM 65cm2 OF VENTILATION REQUIRED
ON EACH END OF CABINET
CABINET FRAME AND CABINET MUST BE
MADE FROM NON-COMBUSTIBLE MATERIAL
MODEL
OPENING DIMENSIONS
W
D
NOTES
H
BIM485
75.5cm 54.5cm 19cm
BIM605
93cm
54.5cm 19cm
BIM730
110cm
54.5cm 19cm
SIDE BURNER
34.5cm 44.5cm
10cm
Opening of at least 32cm2 in must be provided for combustion air
for side burner.