Download Testina A80R

Table of contents
Warnings
General indications
Disassembly/Checking
Assembly/Maintenance
page 3
page 3
page 6
page 16
Warnings
Only qualified personnel should carry out the operations described in this manual.
For programmed maintenance check the instruction book under the heading “maintenance”
General indications
The A80R head is the volumetric type: the motion is provided by a turbine which rotates
at extremely high speed in relation to the quantity of water received by the injectors and is
calibrated to function only at a certain rate of flow.
If the flow of the liquid varies the turbine has to be adjusted with the correct injectors,
otherwise the mechanism will be damaged. Therefore we suggest consulting the diagram D2
on page 1-3 of the instruction manual to find the exact correlation between flow and diameter
of the injectors, or contact the manufacturer directly.
For disassembling and reassembling the snap rings (seeger) be careful not to force the
opening too much so that they do not lose their original shape. We advise using pliers with end
stop, if possible.
The STANDARD Tank cleaning head is supplied with seals (DYNAMIC) in PTFE + O-Ring in
EPDM. Lubricate ONLY with SILICONE GREASE. For use with Detergent liquid, Chemical additives etc that are not compatible with the standard seals, it is essential to contact our TECHNICAL OFFICE for further information. On request, the O-RING seals (DYNAMIC) are available in
different materials such as NBR-FFKM(kalrez)-FKM(viton). The STATIC seals are in FKM (viton).
For programmed maintenance check the instruction book under the heading “maintenance”.
When disassembling check that the gaskets, bearings and gears are intact and in good condition. If an element is not perfectly intact and if it does not function properly request a replacement from the manufacturer.
Always grease the ceramic coatings and the seal gaskets with silicon grease while assembling.
Used symbols
Indicates a assembling/disassembling procedure.
Indicates a checking/maintenance operation on several parts.
Indicates suggestions/procedures to which particular attention should be given.
3