Download 2951 Instructions - Victor Technologies
Transcript
E. Operation 1. Check the torch for proper consumable parts. CAUTION The torch parts must correspond with the type of operation. Refer to the Torch manual for proper parts selection. 2. Connect primary input power. Turn on the gas supply. 3. Set proper gas pressure and flow per the Torch Instruction Manual. 4. Install proper consumables per the Torch Instruction Manual. 5. Test for proper operation. F. ATC Connector Diagram ATC Male Connector Front View ATC Female Receptacle Front View HAND TORCH Pilot Pilot 1 - Black / PIP to Large Pin 1 - Black / PIP 5 - Open 6 - Open 7 8 5 6 7 - Open 8 - Open 1 2 3 4 2- Orange / PIP 3 - White / Switch 4 - Green / Switch 2 - Orange /PIP to Small Socket 3 3 - White - Switch - 4 to Large Socket 4 - Green - Switchto Small Pin 5 - Open 1 2 5 6 6 - Open 7 8 7 - Open 8 - Open Negative / Plasma Negative / Plasma A-03708 NOTE Every effort has been made to provide complete and accurate information in this manual. However, the publisher does not assume and hereby disclaims any liability to any party for any loss or damage caused by errors or omissions in this Manual, whether such errors result from negligence, accident, or any other cause. August 6, 2003 / 6 Août, 2003 6 Manual / Manuel 0-2958