Download 410412

Table of Contents
Part Identification
2-3
Hardware Identification
Assembly Steps
Assembly Tools Required
No. 2 Phillips Screwdriver
Tip Shown Actual Size
4
5-15
Hammer
Français
16-18
Español
19-21
Safety
22
Warranty
23
Not actual size
Part Identification
å
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
A
RIGHT END (1)
F
RIGHT FRONT LEG (1)
O
BOTTOM MOLDING (1)
B
LEFT END (1)
G
LEFT FRONT LEG (1)
D16
DRAWER RIGHT SIDE (1)
C
TOP (1)
H
REAR LEG (2)
D17
DRAWER LEFT SIDE (1)
D
BOTTOM (1)
I
DRAWER FRONT (1)
D109 DRAWER BACK (1)
E
BACK (1)
N
END MOLDING (2)
D706 DRAWER BOTTOM (1)
Page 2
410412
www.sauder.com/services