Download Jump Starte - Silverline

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Specification
Voltage ................................................................................ 12V DC
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Nominal current ......................................................................400A
Peak current ............................................................................700A
Battery capacity ......................................................................15Ah
Battery type .............................................................................VRLA
Wear hand protection.
(Valve-Regulated Lead Acid)
Compressor (max pressure).......................................20bar (300psi)
Inverter output ................................................. 230V~, 50Hz, 150W
Read instruction manual.
12V DC sockets (max current): ............................... 7.5A per socket
Dimensions (H x L x W .....................................330 x 350 x 170mm
Weight ..................................................................................7.55kg
Double insulated for additional protection.
AC charger input .............................................. 230V~, 50Hz, 15W
AC charger output .................................................15V DC, 500mA
WARNING: Contains Lead Acid Battery
WARNING: Contains Lead Acid Battery
AC charger protection class.....................................................
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Conforms to relevant legislation and safety standards.
General Safety
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the device by a person responsible for their safety. Children
must be supervised to ensure that they do not play with the device.
Save all warnings and instructions for future reference.
Work area safety
a) Do not operate electrical devices in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Electrical devices create sparks which may ignite the dust or fumes.
Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) devices.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet
conditions. Do not submerge non-pressure-rated devices in water.
Water entering an electrical device will increase the risk of electric shock.
d) Do not abuse the power lead. Never use the lead for carrying, pulling
or unplugging the device. Keep lead away from heat, oil, sharp edges
or moving parts. Damaged or entangled power leads increase the risk of
electric shock.
e) If operating an electrical device in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
WARNING: When used in Australia or New Zealand, it is recommended that
devices are ALWAYS supplied via Residual Current Device (RCD) with a rated
residual current of 30mA or less.
4
345782_Z1MANPRO1.indd 4
29/04/2014 10:45