Download JUICE EXTRACTOR PRESSE

Transcript
SO-307611_13454 BELLA Juice Extractor IM_Layout 1 11-04-08 4:09 PM Page 6
5.
6.
Turn the food pusher so that the groove in the side lines up with the tab in the feed tube.
Insert the food pusher into the feed tube. (See Figure 5.) Store the food pusher in the feed
tube of the lid until the produce is ready to juice.
Push the locking clamp up and over the lid. Hold clamp firmly and push until the two
black clamp locks rest in the 2 locking slots on the top of the lid. Make sure the lid
is clamped securely into place. (See Figure 6.)
Groove
Lid Locking
Slots
Tab
Black
Clamp
Locks
Platform
Figure 5
7.
8.
Figure 6
Figure 7
Add the pulp basket. (See Figure 7.) Tilt the pulp basket slightly so that the lip of the juice
bowl fits snugly over the inside of the pulp basket. Push the bottom of the pulp basket
so that it rests securely on its platform.
IMPORTANT: To avoid spillage, make sure the pulp basket sits flush up against
the base.
NOTE: To save cleaning time, line the pulp basket with a plastic grocery store produce
bag.
Add the juice pitcher lid to the juice pitcher so that the lid’s cut out fits over the pitcher’s
pouring spout. Tilt the juice pitcher slightly so that the Extractor’s juice spout fits into
the top of the pitcher lid. (See Figure 7.) This will prevent juice spillage.
6