Download Digital Clamp Meter

Digital Clamp
Meter
0700250
INTRODUCTION
This is a portable clamp meter, with a 3-1/2 digit LCD screen designed for use by electricians, technicians and
hobbyists looking for an accurate and reliable instrument. It is powered with a standard 9V battery, and can provide
100 to 200 operating hours, depending on type of battery and intensity of use.
SPECIFICATIONS
AC Current
0.1A to 1000A
AC Voltage
1V to 750V
DC Voltage
1V to 1000V
Resistance
100mW to 20KW
Continuity test
50 ± 25W with audio tone
The following specifications assume a 1 year calibration cycle and operating conditions of temperature scale of 18°C
to 28°C (64°F to 82°F) with relative humidity up to 80% unless otherwise noted. Accuracy specifications take the
form of:
±[(% of reading)+(Number of least significant digits)]
AC Current Indication: Average (RMS of sine wave)
Range
Resolution
Accuracy (50 Hz to 60 Hz)
200A
100mA
±(2.5% + 5)
1000A
1A
AC Voltage Indication: Average (RMS of sine wave)
Range
Resolution
Accuracy
750V
1V
±(2% + 5)
Input impedance: 9MΩ
Overload protection: 750V AC/DC on all ranges
±(2.5% + 5) for 800A and below
±(3.0% + 5) for other current
Overload protection: 1200A within 60 seconds
Jaw Opening: 2" (5 cm)
Resistance
DC Voltage
Range
Resolution
Accuracy
Range
Resolution
Accuracy
1000V
1V
±(0.5% + 1)
200Ω
0.1Ω
±(1% + 3)
20KΩ
10Ω
±(1% + 1)
Input impedance: 9MΩ
Overload protection: 750V AC/DC on all ranges
Overload protection: 500V DC/RMS AC on all ranges
Continuity
Range: 200W
Buzzer sound: 50 ± 25 W
Overload protection: 500V DC/RMS AC
For any technical questions, please call 1-800-665-8685
2