Download PRE-FILTER - Bluewater

Nominal Pressure
Model
Operating pressure
Nominal Pressure
Scale ¾”
1.5 – 6 bar
(21.75 – 87 psi)
PN 10
The nominal pressure denotes the pressure class, according to which the filter must fulfill the
requirements of DIN EN 13443-1 and DIN 19628. The maximum operating pressure is lower, in order to
ensure the optimal function of the filter.
Installation dimensions Scale ¾”
Figure 3.
Installation dimensions Scale ¾”
Model
A
B
C
D
E
F
G
Scale ¾”
180
78
207
236
125
82
13
All dimensions in [mm] (see Figure 3)
•
A = Installation length
•
B = Device width
•
C = Height above pipe centre
•
D = Height below pipe centre
•
E = Installation depth till pipe centre
•
F = Connection dimension residual water
•
G = Nominal diameter residual water
Extent of Supply
•
Pre-installed backwash protective filter
•
Installation- and Operating Instructions
•
Built-in rotary flange JQE ¾”
08