Download Manuel d`installation

User’s manual
GB
Thank you for having chosen this equipment and having shown confidence in our
products. The radiator that you have just purchased has passed many tests and inspections
to optimise its quality and provide you with full satisfaction.
Some recommendations:
Read the instructions before starting the installation of your radiator to satisfy standard
requirements.
Check the power supply voltage and switch the power supply off before connecting your
radiator.
Keep the instructions, even after you have installed your radiator.
Radiator characteristics:
CAT C
IP24
Classe II
IK08
: Equipment satisfying the NF Electricity performance standard according to
the criteria of the stated category.
: Equipment protected against water splashes
: Double insulation (no connection to earth).
: Resistance to mechanical shocks
: Equipment conforming with European Directive 2002/96/CE (DEEE).
1 - INSTALLING THE RADIATOR
1.1 - Radiator composition
Horizontal model
Vertical model
Control box
Control box
Wall-mounting
frame
Wall-mounting
frame
Thermostat
Thermostat
Heating element
Facade
Heating element
Facade
1.2 - Installing your radiator
Your radiator is delivered with its wall-mounting frame. The choice of screws and inserts will
depend on the nature of your wall and you must make sure that you are using appropriate
screws and inserts capable of supporting the weight of the radiator.
This radiator was designed so that it will remain upright for the time necessary to make the
connections and install the wall-mounting frame, to facilitate the connection.
Once the radiator has been placed upright, you can remove the wall-mounting frame which
will be useful to you as a template to drill the holes.
 49