Download Operating and installation instructions Manuel d`utilisation

Transcript
7
4
English
8
4
15
11
12
14
9
13
M+P-26A-0890
3. Unscrew the screws (4).
10
5
6
M+P-26A-0912
5. Place ServoFlow (6) into the casing (7).
6. Remove protective covers from the compressed air
connection (8), (9), (10) and (11).
7. Lay cables (12), (13), (14) and (15) as shown, shorten
them if necessary and connect.
5
M+P-26A-0905
Pressure
4. Fold the cover (5) upwards in service position.
16
M+P-26A-0913
8. Connect ServoFlow (6) to the main board (16).
9. Fold down cover (5) and tighten with screws (4).
10. Tighten front cover at the room ventilation unit.
II Servoflow for Avent P190/P310/P460
3