Download User manual

20
English
Descaling the coffeemaker
Scale builds up inside the coffeemaker during use. It is essential to descale the
coffeemaker when the CALC CEAN light is lit. Only use the special Philips
SENSEO® SARISTA descaling solution (CA6400) to descale the coffeemaker.
For more information on how to descale this coffeemaker, you can watch the
instruction movies on www.philips.com/senseo-sarista/support.
When to descale
-- Descale the coffeemaker as described below as soon as
the CALC CLEAN light lights up continuously.
Why to descale
Your reasons to descale:
-- It prolongs the life of your coffeemaker
-- It ensures maximum cup volume
-- It ensures maximum coffee temperature
-- It prevents malfunctioning
If you do not descale the coffeemaker regularly or do not perform
the descaling procedure correctly, scale residue remains behind in the
coffeemaker. This causes scale to build up more quickly and will ultimately
stop your coffeemaker working properly. If this happens, repair is not
covered by the terms of the guarantee.
Descaling agent
Only use the special Philips SENSEO® SARISTA descaling solution
(CA6400) to descale the coffeemaker. This solution has been designed to
ensure continued good performance of your coffeemaker throughout its
operating life.
-- You can buy Philips SENSEO® SARISTA descaling solution in the online
shop at www.shop.philips.com/service.
Keep the bottle with descaling solution out of the reach of children.
Never drink the water with descaling mixture that you pour into
the water tank or any water with residues that comes out of the
coffeemaker during the descaling procedure.
Descaling procedure
The descaling procedure lasts 45 minutes and consists of a descaling cycle
and two rinsing cycles. Do not interrupt the descaling cycle and do not
switch off the coffeemaker before you have performed the two rinsing cycles.
Before you start the descaling procedure make sure the activity light lights
up green continuously. To ensure this please make sure the following steps
are taken.
1Make sure the bean-funnel is attached properly.
2Empty the coffee grounds container.
3Make sure the water tank is filled with water.
Note: Once you have started the descaling cycle, you are unable to exit before
the entire descaling procedure is complete. Even when you remove the plug the
machine will stay in the descaling cycle.
4203_000_7242_2_DFU-Luxury_A5_v1.indd 20
1/9/13 1:37 PM