Download tripod evo

Tripod Evo_Manuale - Rev.2 - January 2012
REVISION
The product must be withdrawn from use immediately when it have been used to arrest a fall.
Manufacturer's inspection of the tripod must be carried out after a fall or whenever a defect has been detected during periodic inspection.
The manufacturer's inspection can be carried out by:
- manufacturer
- or person recommended by manufacturer
- or company recommended by manufacturer.
During this inspection will be established if the product can be longer used and will be defined the admissible time of the product use till next
manufacturer's inspection.
LIFETIME
The lifetime is unlimited, unless any defect appears and provided that periodical check-ups are made at least once every 12 months and
the results are recorded in the life sheet of the product. The following factors can reduce the lifetime of the product: intense use, damage
to components of the product, contact with chemical substances, high temperatures, tears and abrasions, violent impacts, failure to maintain
as recommended. When suspect that the product is no more safety and reliable, please contact C.A.M.P. spa or the distributor.
a
e
d
EN 795:1996 /B + A1:2000
EVO
Ref. 1883
c
Date
of manufacture:
01.2012
h
Serial number:
000001
i
g
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED. THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST
USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS,
REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON. THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE
PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
Notified body, at which the European certification was performed and which supervises the production of the equipment: APAVE SUDEUROPE SAS - BP 193 - 13322 MARSEILLE CEDEX 16 - FRANCE
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
SERIAL NUMBER
DATE OF MANUF.
! working load limit: 500 kg
! working height:
- legs fully extended: 229,5 cm
- legs fully retracted: 147,2 cm
! weight: 17 kg
! shipping dimensions: 172,3 x 23 x 23 cm
BASIC EQUIPMENT
! head - made of zinc-plated painted steel
! anchor points - 1main central eye bolt and 3 additional lateral eyes in the head.
! legs - aluminium adjustable locking legs are secured by safety pins . Steel feet incorporate a rubber sole for flat surfaces
and spiked edges for slippery surfaces.
! chain - leg chain is supplied to minimize horizontal forces and prevent the legs spreading and collapsing.
head
IDENTITY CARD
3 additional lateral eyes
outside part of leg
DATE OF PURCHASE
DATE OF PUTTING
INTO OPERATION
central eye bolt
PERIODIC EXAMINATION AND REPAIR HISTORY
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
detent pin
inside part of leg
2
3
4
chain
is a brand owned by
3 additional
anchor eyes
central eye bolt
USER NAME
1
TRIPOD EVO
TRIPOD EVO is a component of personal protective equipment against falls from a height.
TRIPOD EVO has been tested in according to EN 795 as a transportable temporary anchorage class B.
Tripod has to be used in conjunction with fall arrest equipment . It is designed to support only one person.
TRIPOD EVO is designed to use with 284 rescue lifting device.
f
TRIPOD
b
DATE
EN 795:1996 /B + A1:2000
Ref.: 1883
steel foot
locking hole for
the ref.284
fastening
working height:
- legs fully extended: 229,5 cm
- legs fully retracted: 147,2 cm
f.
g.
h.
i.
Device type.
Model symbol.
Reference number.
Number/year/ class of the European standard
CE marking and number of a notified body
controlling manufacturing of the equipment
(art. 11)
Month and year of manufacture.
Serial number of the tripod.
Caution: red the manual
Marking of the manufacturer or distributor of
the tripod.
READ CAREFULLY BEFORE USE
THE EQUIPMENT
Safety
Tripod
TECHNICAL DATA
CONTENT OF THE IDENTITY LABEL
a.
b.
c.
d.
e.
Instruction Manual