Download DSH 700 / DSH 900

1.2 Explanation of the pictograms and other
information
Symbols
Prohibition signs
Revolutions
per minute
en
Revolutions
per minute
Transport by
crane is not
permissible.
Warning signs
General
warning
Warning: hot
surface
Warning:
Flying sparks
present a fire
risk.
Warning:
Risk of
kickback.
Location of identification data on the machine
The type designation and serial number can be found on
the type identification plate on the machine. Make a note
of this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Minimum
permissible
speed rating
of the cutting
discs used
Obligation signs
Type:
Generation: 01
Wear
protective
gloves.
Wear safety
shoes.
Don’t use
damaged
cutting
discs.
Smoking and
naked flames
prohibited.
2
Printed: 08.07.2013 | Doc-Nr: PUB / 5069784 / 000 / 01
Motor stop
system
Fuel pump
max.
5100 rpm
Warning:
Don’t inhale
toxic vapors
or exhaust
fumes.
WARNING!
Read and
follow all
safety
precautions
in the
operator’s
manual.
Failure to
follow these
instructions
could result
in serious or
fatal injury.
Wear ear
protection,
eye
protection,
respiratory
protection
and a hard
hat. Eye
protective
devices must
comply with
ANSI Z87.1.
Don’t use
toothed
cutting
discs.
Serial no.: