Download PANCAKE Level Sensor PR 6251

Transcript
Housing
Degree of protection
Cable
stainless steel 1.4021 or 1.4542
hermetically sealed welded
IP 68 (depth of water 1.5m, for 10,000hrs)
diameter
3...5mm
length
5m
2
cross section
4 x 0.13mm
bending radius ≥ 50mm (fixed installation)
≥ 150mm (repeated bending)
sheath
colour
grey (L version)
blue (LE version)
green (LA version)
material thermopl. elastomer
colour code
red
supply +
(L, LE version) blue
supply grey
output green
output +
colour code
red
+20V...+28V
(LA, LAC)
blue
0V
grey (=20V...28V)
single sensor mode
grey (=0V)
two sensor mode
green
output + (mA)
Câble de prolongation
Nous recommandons d'utiliser le câble PR 6135 dans les installations industrielles
pour relier la boîte de jonction et l'électronique.
Fig. 5b
Raccordement d'un capteur type LA
Fig. 5c
Raccordement de deux capteurs type LA
The level sensors PR 6251/..LE are certified for use in hazardous areas by the PTB
(Physikalisch- Technische Bundesanstalt). These sensors are marked with a label
with the important data for intrinsic safety and the EX symbol.
Protection type
intrinsic safety
Marking
EEx ia IIC T6
Certificate of conformity
PTB Nr. Ex-00.E.2040
Connection diagram of the level sensor
Standard sensor (L, LE versions)
Sensor with amplifier (LA version)
La distance maximale entre le capteur et l’appareil électronique est 500m.
E-4
F-9