Download Bake Star 3 / 5 / 8 / 10 - i

Bake Star 3 / 5 / 8 / 10 - i
Setting
Function and vulues
Pre-heating margin
Set the number of degrees that the pre-heating temperature must
be above the set temperature of the first step of the program. This
value can be both positive and negative.
• -50°C/-90°F – 50°C/90°F
open the door
The door can be opened automatically at the end of the process.
The door is opened automatically after a delay with the ‘timed’ setting. The time between the end signal and automatic opening can
be set to 3 seconds in the service menu.
• no – timed - yes
Open for cooling
This parameter indicates whether the oven door can be opened in
the following situations:
- During cooling for the cleaning program.
- When a program is started and the temperature in the oven is
above the set temperature.
- When the oven has been switched off and the temperature in
the oven is above 80°C.
• no - yes
Timer function
This parameter indicates whether the timer for automatically starting a program can be used.
• no - yes
Set buzzer
Setting the alarm signal. There are 5 different alarm signals available. This option is useful when several machine are placed next to
each other.
Button tone
Setting a tone that is heard when a button is pressed.
Calcium filter
The displayed value shows the remaining capacity of the calcium
filter indicated in percentages.
Replace calcium filter
After the calcium filter has been replaced, this option resets the
capacity indicator of the calcium filter to 100%.
Clear fault
Reset a fault.
This function is only available when a fault has occurred.
WWW.FRIJADO.COM
2-EN-21
9123675 rev. 4 / 2009