1
Download Mode d'emploi
Transcript
E Code ‘S’ SET ? Fonction SYS RST STO 0 or OFF STO 1 or ON STO ? ‘U’ UNI ? UNI 0 or OFF UNI 1 or ON ‘V’ VER ? Sends the configuration of the unit for the current channel. 1 or 2 (measuring unit, Resolution, Direction, Rel/Abs, locked display and keyboard status). Reset the unit (customer parameters) Unlock the display Lock the display Print out the display status Sends the current unit mode (mm or ‘’) Lock the Unit function Unlock the Unit function Sends the version and date of software (Vx.y dd.mm.yy) RS 232 messages of transmission errors Code ERR0 ERR1 ERR2 ERR4 ERR5 ERR6 ERR7 ERR8 ERRA ERRB Display ‘fct oFF’ ‘rS Err’ ‘rS codE’ ‘rS FULL’ ‘no Func’ ‘rS orun’ ‘rS Err’ ‘rS Err’ ‘MEMO Err’ ‘MEM1 Err’ P1 ERR P2 ERR P12 ERR ‘no Prob1’ ‘no Prob2’ ‘no Prob’ Type of error Command not executed, deactivated function Parity error Unknown format Capacity Overflow, more than 200 characters without CR Command not executed, unauthorized function. Overrun error Frame error Stopped transmission error Not critical error of Flash memory Critical error of Flash memory, requires a keyboard acknowledge. Probe 1 not connected Probe 2 not connected Probes 1 and 2 not connected RS 232 parameters of the unit Baud rate Parity Data Bits Stop bits Flow Control 4800 (transmission speed) even 7 2 None 54
