Download POWDER DISPENSER

GB
STORAGE
REPLACING THE VIAL
1
Store the dispenser at
10-25°C, protected from
light. Put the black cover
over the tip to avoid
early deterioration from
oxygen and/or humidity.
MAINTENANCE
Remove the cover to (re)
load. Remove empty/
expired reagent vial.
Before replacing reagent
vial, clean the dispenser
thoroughly.
1
If the handle doesn’t
move backwards when
released, turn the dispenser upright (with the
tip up). Use your thumb
to return the handle to
the closed position.
2
Shake excess powder
out while pressing and
releasing the blue handle several times.
2
Press blue handle again,
then release quickly.
Repeat procedure until
the handle operates
smoothly.