Download 2 - Sony

5 AUTO button
Press and light the button to automatically adjust the
iris according to the amount of input light.
When this button is lit, the reference value for
automatic iris adjustment can be set with the iris
control.
If you press the button when lit, it goes dark and
manual iris adjustment is enabled.
6 f-number display
Displays the f number of the current iris setting. When
the iris is closed, “CL” is displayed.
When the DXC-D50 series is connected, “OP” is
displayed for the maximum f-number value.
7 EXT (lens extender) indicator
Lights when the lens extender is used.
8 SENS (sensitivity) control knob
Used for manual iris adjustment in Absolute mode.
This control is not operative when Relative mode is
selected.
See the table “Iris adjustment functions”to the right.
9 COARSE control knob
Used for manual iris adjustment.
qd IRIS RELATIVE (iris relative) button
When the IRIS/M.BLACK ACTIVE button is lit, the
iris adjustment mode can be selected with this button.
Press and light up the button for Relative mode or
press so that it goes dark for Absolute mode.
When the IRIS/M.BLACK ACTIVE button is not lit,
Relative mode is automatically selected and this button
is not operative.
Note
When VR STD MODE is set to Absolute with “VR
Setting” of the RCP Config menu, Relative mode is
not selected even if you turn the IRIS/M.BLACK
ACTIVE button off. When you turn the IRIS/
M.BLACK ACTIVE button on, the iris setting
corresponding to the IRIS lever position is restored.
Iris adjustment functions
Relative mode
Absolute mode
(RELATIVE button lit)
(RELATIVE button not lit)
IRIS lever
(RCP-D50)/
IRIS control
(RCP-D51)
Adjusts the iris with
relative values from
OPEN to CLOSED.a)
COARSE
control
Adjusts the total
Sets the lower limit
range from OPEN
for CLOSED.
to CLOSED in relative
values.
SENS
control
Does not function.
See the table “Iris adjustment functions”to the right.
0 Master black control ring
Turn to manually adjust the master black level.
qa IRIS control lever
When the AUTO button is not lit, you can adjust the
iris manually by moving the lever.
When the AUTO button is lit, the reference value for
automatic iris adjustment can be set.
Adjusts the iris
within the variable
range set by the
SENS and COARSE
controls.
Sets the upper limit
for OPEN according
to CLOSED value
set by the COARSE
control.
a) The adjustable range can be set with “VR Rel. Scale” of
the RCP Config menu.
See the table “Iris adjustment functions” to the right.
qs Preview switch
Press this switch to control an external device
connected to the EXT I/O connector on the connector
panel.
For the operational specifications, see “3 EXT I/O
(external input/output) connector (9-pin)” in “Connector
Panel” on page 71.
69