1
Download seca 959
Transcript
Fastening the weighing cell cable ATTENTION! Malfunction due to assembly error If the cables are assembled so that they are under voltage, e.g. if they are bent sharply or plugs are snapped off, this can cause faulty displays and failure of the display. – Lay all cables so that they are not too sharply bent and so that plugs are not snapped off. – Ensure that there is strain relief by laying all cables in the appropriate harnesses. 62 • Press the cable clips (fastened at the factory to the weighing cell cable) into the holes on the lower frame and on the handle until they snap in audibly.
