Download JGC-WE-055 - Service Checkpoint Germany

size: 100x145mm
ENGLISH
RADIO OPERATION, CLOCK FUNCTIONS
Saving station
• You can store a total of 40 stations for easier access. 10 preset keys are
available for each frequency range.
• Use the BAND/WAKE button (16) to select a frequency range and set the
desired station.
• Press the TIME SET/MEMORY button (4). The preset key number and the
control display MEMO flashes on the display. With the number keys (17), the
desired preset key can be selected and stored by pressing the TIME SET/
MEMORY button.
• Proceed with storing further stations.
• You delete a station from the preset key if you save another station in this
storage space. The previously stored station is automatically written over.
• Note: If you do not press any buttons for approximately 7 seconds, the display
shows its previous display. Then you must press the TIME SET/MEMORY
button again.
Recalling a station
• Recall the preset key by pressing the number keys (17). The station is then
automatically set.
• Press the number key 0 to call up the preset key 10.
• The preset key number is shown on the display (6).
Setting the time
• The time can only be set in standby-mode.
• Press the TIME SET/MEMORY button (4). The time is then shown flashing on
the display (6).
• Press the MIN- (13) and HOUR+ (12) button to set the minutes and hours.
Confirm with the TIME SET/MEMORY button.
• Note: If you do not press any buttons for 5 seconds, the display returns to its
previous screen. Then you must press the TIME SET/MEMORY button again.
34
WE-055-IM-DE-EN-V2.indb 34
19/01/2010 1:51