Download MOBITRONIC - Starcamp Srl

PS-300-IC.qxd
18.11.2003
15:34 Uhr
Seite 18
Safety instructions
Regarding the working lamp
- Never operate the working lamp without protective cover (risk of breakage and
injury)!
Regarding the compressor
- Never operate the compressor with defective or damaged valves, connectors
or adapters!
Protect your environment!
Recycle the packing material!
A damaged or defective PowerCombi (battery) should not be disposed of in the
normal domestic waste!
Scope of delivery
See
A1
A2
A3
A4
A5
A6
Quantity
1
1
1
1
1
1
Designation
PowerCombi
Booster cable
Mains charger
12 V charging cord
Adapter-set compressor
Storage bag
Article No.
Intended use
The PowerCombi is a multi-function unit which combines the most important functions of
various accessory devices in one housing.
The compressor serves for pumping up objects of small volumes (car and bike tyres etc.).
The compressor should cool down for approx. 10 minutes after an operation time of 10
minutes.
The starting aid function is designed for a current load of approx. 50 A.
When using as mobile 12 V voltage supply, the max. current consumption of the
consuming unit may amount to max.10 A altogether.
The installed 230 V inverter has a load of a max. 250 watts.
Caution! Pay attention to the voltage and current consumption of the equipment
being operated in order not to overcharge the PowerCombi. Overcharging may
cause the failure of the PowerCombi or of the equipment being operated.
The voltage and current consumption can be found on the nameplate or in the operating
instructions of the equipment being used.
18