Download DD18-2 - Clas Ohlson
Transcript
Problem Possible cause Solution The machine does not start. Flat/discharged battery. Recharge the battery. The battery is overheated. Let the battery cool down. Worn brushes. Contact our Customer Services. Faulty power trigger. Contact our Customer Services. Blunt or damaged drill bit. Replace drill bit. Too much pressure applied. Decrease applied pressure. Flat/discharged battery. Recharge the battery. The battery is overheated. Let the battery cool down. The motor is overheated. Let the machine cool down. Unusual sounds and/or strong vibrations. The drill/screwdriver bit is not centred or incorrectly fitted. Make sure that the drill/screwdriver bit is centred, correctly inserted and securely fixed. Sparks in the motor. Faulty brushes. Contact our Customer Services. The machine is slow and/or shuts off. Winding short circuited. Dirty commutator. Disposal This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local council. Specifications No-load speed 0–400/1500 rpm Battery 18 V 2.0 Ah lithium-ion LXC series (4.0 Ah battery available as an accessory) Torque settings 15 plus a drill setting, max 45 Nm Charging time approx. 55 mins for 2.0 Ah battery / 105 mins for 4.0 Ah battery Sound level LpA: 70.7 dB(A) (uncertainty KpA: 3 dB) LwA: 81.7 dB(A) (uncertainty KwA: 3 dB) Vibration value ah 0.896 m/s², K: 1.5 m/s² ah,D 1.393 m/s², K: 1.5 m/s² (Drilling in metal) Weight 1.6 kg with 2.0 Ah battery or 1.9 kg with 4.0 Ah battery 11 ENGLISH Troubleshooting guide