Download POWERTEL TF 520
Transcript
Telephoning 5 Telephoning Taking a call If a call is received, the Call/SOS LED flashes. The flashing of the Call/SOS LED can be altered; Menu Structure, Page 82 (RING LIGHT). , or Take the call or 0 Take the call (handsfree function) If the caller number display (CLIP) is available on your telephone line ( Page 81) and you have selected VOICE:ON via the menu, the phone number of the caller is announced prior to the ringing tone. If the phone number of a caller has been stored in the phone book ( Page 83) and a name vocally recorded for it, the name recorded is announced between the first two rings. Displaying the duration of a call The duration of a call is displayed in minutes and seconds during the call. Ending a call or End the call or (if the handsfree function is active) 0 End the call Making a call / or . or Enter the phone number (max. 22 digits) Delete the last digit if incorrect Dial the phone number Dial the phone number (handsfree function) It is also possible to pick up the receiver first to obtain the dialling tone. The digits then entered are dialled immediately. It is not possible to correct wrong digits individually using this dialling procedure. Setting the ringing volume 67 The ringing volume can be altered to one of 5 different volume levels using the menu; Page 82: Level 0: Ringing volume off (mute) Level 1: Ringing volume quiet Level 4: Ringing volume loud Setting the receiver volume Adjust the receiver volume using the slide control which is located underneath the receiver when on the base unit: Slide control to the left: Receiver volume becomes quieter. Slide control to the right: Receiver volume becomes louder. Amplifying the receiver volume to +40 dB 68 The receiver volume can be increased to +40 dB by pressing the Amplification button. Amplification on Amplification off You can use the menu to set−up the telephone so that the amplification is set to +40 dB directly without the need to press the Amplification button. Open the menu and select BOOST LOCK:ON; Menu Structure, Page 82. Receiver tone control The tone control only works when the receiver volume amplification to +40 dB has been activated (amplification LED lights up). You can adjust the tone produced in the receiver using a slide control on the right−hand side of the housing. 75
This document in other languages
- français: SWITEL TF520
- Deutsch: SWITEL TF520
- italiano: SWITEL TF520