Download MULTILADER 9E - Absolu

to deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use
and operation of our products, or which are connected with such operation in any way.
6. Cleaning and maintenance
P
The charger is entirely maintenance-free in use, and requires no servicing of any kind. However, it is in your own interests to protect the unit from dust, dirt and damp!
P
To clean the charger, disconnect it from the car battery and any other battery, and wipe it
clean with a dry cloth (don’t use cleaning agents!)
7. Recommended charge leads /polarity
The requirements made on rechargeable batteries vary greatly according to their particular application, and this in turn calls for different types of battery connector. Please note that connectors, connector names and polarities may vary from one manufacturer to another. For this reason we recommend
that you always use genuine matching connectors of identical construction. The following charge
leads are suitable for battery charging with this unit:
Japan
Order No. 3371
G2 (AMP/G2,5)
Order No. 3011
BEC
Order No. 3037
JR
Order No. 3021
JR-Sender
Order No. 3022
Be sure to use genuine charge leads fitted with cable of adequate conductor cross-section.
8. Charger controls
Mains switch
(backside)
Balancer connector
EH for Graupner
Charge indicator LED‘s
LiPo selection LED
POWER-LED
LiXX charge
indicator LED
Mains cable
100~240 V AC
for internal
power supply
Selection key
LiPo/LiFe
Charge outputs LiPo/
LiFe batteries
Operating Manual Multilader 9E
Charge putputs
NiCd/NiMH batteries
∆peak detection
Charge outputs NiCd/
NiMH/Pb-batteries
21