Download Quickstart PC-Service-Programm Type 8681

PC Service Program Type 8681
Installing hardware and software
3.
INSTALLING HARDWARE AND SOFTWARE
3.1.
Requirements
3.1.1.
Hardware
• PC (operating system: Windows XP or higher)
• USB adapter set (standard adapter with connection cables - order no. 227093) for connecting a PC and
control head Type 8681
3.1.2.
Software for PC
• PC service program (Setup_PCTool8681_X_X_X_X_YYMMDD.EXE):
The corresponding software package is provided by Bürkert.
Save the zip archive contained there to the PC, unpack it and start the EXE file for the automatic installation. For
more information about the installation, see Chapter "3.2.1" on page 9.
3.2.
Installing the software and hardware
Before installing the hardware, you should install the software on the PC so that the PC service program can
immediately detect the connected devices. If you leave the default settings of the setup EXE file unchanged, all
the drivers required are automatically loaded as well.
To connect the control head to the PC, you need the USB adapter set. This must only be connected as described
below. The standard adapter or the control head is automatically detected by the software. For the firmware
update, you can also use the adapter box to simplify the process.
This provides a virtual serial interface that is displayed by the PC service program (COM X Serial Device Adapter).
8
English