Download VELUX INTEGRA® Active KRX 100

Initial set-up
P
reparing sensors and registering them
in the controller
reset
Registering sunscreening products in the
controller
ote: Items 1-5 must be completed within 10 minutes.
N
In case of more solar sensors, register these as described
in the section Registering new solar sensors.
1
Prepare sensors for registration:
Press the button at the bottom of the sensor with a
pointed object for at least 5 seconds until the diode
flashes.
Register sensors in controller KRX:
2 Press
"Register" to register the two sensors.
reset
Auto set-up
Prepare sensors
for registration and
press Register
within 10 minutes
Register
The sunscreening products must be copied from existing
remote controls to controller KRX
KRX
Back
Types of remote controls:
Auto set-up
3 Registration is running. This might take some minutes.
VELUX remote control A
If the sunscreening products are operated with VELUX
remote control A, continue with pages 18-19.
A
information
The display shows "Sensor registered" when the sen4 sors
have been registered.
Press
5
"Continue" to proceed.
Sensor
registered
Continue
information
he display shows that the program VELUX ACTIVE
T
has not been enabled.
Press
"Enable" to start registration of sunscreening
products in the controller.
velux active
not enabled
Menu
Enable
VELUX remote control B
If the sunscreening products are operated with VELUX
remote control B, continue with pages 20-21.
Auto set-up
o not press "Register" until the sunscreening products
6 Dhave
been prepared via a remote control (pages 17-23).
16 VELUX
ENGLISH
B
Prepare products
for registration and
press Register
Register
Back
ENGLISH
VELUX 17