Download mit gControl mit gControl +

3.
4.
5.
6.
7.
8.
should only be flown indoors, where there is no air movement of any kind. Even the airflow
from an air-conditioning unit can have an adverse effect on the machine’s flying characteristics. Do not fly outdoors!
The helicopter’s integral Lithium-Polymer battery contains potentially harmful chemicals; it
must not be removed from the model, nor opened.
The LiPo battery should only be charged under the supervision of an adult. Keep children
well clear during this procedure.
If the rotors are damaged or broken, do not attempt to fly the model again, as it will be uncontrollable and could injure you.
Never try to open the model or modify its construction.
Flying the helicopter requires an open indoor space around 4 x 4 x 2.5 m in size, devoid of
obstacles. Do not fly the model close to people, animals, furniture or other obstacles.
The operator of the model must be in full possession of his or her bodily and mental faculties. As with car driving, operating a model aircraft under the influence of alcohol or drugs is
not permissible under any circumstances.
1. Set contents
1.
2.
3.
4.
5.
The infra-red remote control system is included in the set.
6 x 1.5 V AA-sized dry cells are included in the kit (replacement Order No. 3426)
Helicopter battery: 3.7 V LiPo
The helicopter battery is recharged via the transmitter
or via the USB lead
2. Transmitter batteries
1. Switch the transmitter on. Change batteries when the power LED expires immediately
after switching on the transmitter.
2. Insert the cells in the transmitter compartment with correct polarity.
3. Ensure that the battery cells are fitted with correct polarity.
4. Never mix new and old cells.
5. Never fit different makes of battery cell.
Operating Instructions Nano Star 3 Gyro
20