Download Bedienungsanleitung

Data view mode
Data View Mode
EN
here you can check the total voltage, single cell voltage and internal resistance of the connected battery
pack. Also displayed is the chargers inner and outer temperature.
NOTE: By pressing VIEW the charger enters
the internal resistance check process for
one time only.
Please make sure that you have connected a
battery to the output of the charger!
Touch: set the battery type (LiPo/LiIon/LiFe)
You may use the balance function for a
unbalanced battery pack.
Press BALANCE to select the battery type,
then press START to begin.
Press
menu.
to go back to the battery type
WARNING: carefully check the battery
type and settings - fire hazard!
32
X-pert Charger X90T