Download SATELLITE SPEAKER SYSTEM

English
Connecting the speakers
Connect satellite speakers and center speaker to the terminals on the amplifier using speaker cords supplied.
SX-A305C
(CENTER)
SX-A305F
(FRONT RIGHT)
SX-A305F
(SURROUND
RIGHT)
SX-A305F
(FRONT LEFT)
Speaker
terminals on
the amplifier
SX-A305F
(SURROUND
LEFT)
When connecting an amplifier or receiver
Set the following items as follows, if it has
similar functions:
• Speaker size: Small
• Crossover (cutoff) frequency: 80 Hz
When connecting a JVC Powered Subwoofer
SX-DW303
Set the following items as follows:
• The FREQUENCY control:
around 80 Hz to 120 Hz
• The CUT OFF FILTER button:
to the — VARIABLE position
As shown in the figure, rotate the speaker terminal knob counterclockwise (
) and insert the speaker cord into the hole. Then rotate
the knob clockwise (
) to secure the cord. Reversing the ª and · polarities will greatly degrade the stereo effect and sound
quality.
· Terminal
ª Terminal
Before connecting the
speaker cords;
Twist and pull the
insulation coat off and
remove.
Black
White
· Terminal
ª Terminal
Black
White
Specification
SX-A305F
SX-A305C
Type : 2-Way Bass-reflex type
Magnetically Shielded Type
Speaker : 12.0 cm cone ⳯ 1
2.0 cm dome ⳯ 1
Power Handling Capacity : 100W
Impedance : 8 Ω
Frequency Range : 60 Hz ~ 50 000 Hz
Sound Pressure Level : 85.5 dB/W•m
Dimensions (W ⳯ H ⳯ D) : 153 mm ⳯ 251 mm ⳯ 189.5 mm
Mass : 3.2 kg each
Type : 2-Way 3-Speakers
Bass-reflex type
Magnetically Shielded Type
Speaker : 10.0 cm cone ⳯ 2
2.0 cm dome ⳯ 1
Power Handling Capacity : 100W
Impedance : 8 Ω
Frequency Range : 60 Hz ~ 50 000 Hz
Sound Pressure Level : 86.5 dB/W•m
Dimensions (W ⳯ H ⳯ D) : 350 mm ⳯ 144.5 mm ⳯ 189.5 mm
Mass : 3.8 kg
–2–