Download Operating Instructions

4 Mounting
4 Mounting
4.1 Mounting steps
Mount/Dismount indicating and adjustment
module
The indicating and adjustment module can be inserted or
removed at any time. It is not necessary to interrupt the voltage
supply.
For mounting, proceed as follows:
1
Unscrew the housing cover
2
Place the indicating/adjustment module in the requested
position on the electronics
Information:
Four different positions are possible, each displaced by 90°.
32057-EN-081002
Fig. 3: Mounting the indicating and adjustment module
3
Press the indicating/adjustment module lightly onto the
electronics and turn it to the right until it snaps in
4
Screw housing cover with inspection window tightly back
on
Indicating and adjustment module •
9