Download PKS-140

SPARE PARTS
REF.NR.
5
6
7
9
12
15
16
17
18
20- 24 + 26
27
32 + 33 + 35
34
46 + 47 + 52
54
57
64
66
68
-
DESCRIPTION
BRUSH CAP
CARBON BRUSH SET
CARBON BRUSH HOLDER
STATOR
SWITCH
BEARING COVER
BALL BEARING 627 ZZ
ROTOR
BALL BEARING 628 ZZ
SPINDLE MECHANISM COMPLETE
GUIDE
LEVER FOR MITRE ADJUSTMENT
LEVER FOR GUIDE
WRENCH COMPLETE
SPLITTER
SPRING FOR SAWCOVER
FLANGE INSIDE
FLANGE OUTSIDE
BOLT LEFT
HEXAGONAL KEY
CAM WRENCH
UK
PUSH NR.
408180
408181
408182
408183
408184
408186
800627
408187
800628
408188
408189
408190
408191
408192
408198
408193
408194
408195
408199
408196
408197
SAFETY INSTRUCTIONS
English
The following pictograms are used in these instructions
for use:
Circular saw
THE NUMBERS IN THE FOLLOWING TEXT CORRESPOND WITH THE PICTURES AT PAGE 2.
Denotes risk of electric shock.
The pictures mentioned in the text correspond with
the pictures at page 2.
TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeths
Weight
Lpa (sound pressure level)
Lwa (sound power level)
aw(vibration value)
|
|
|
|
|
|
|
|
|
|
230 V~
50 Hz
550 W
4200/min.
140x2,4x12,75 mm
Z18
2,8 kg
85 dB(A)
90 dB(A)
1.324 m/s2
PRODUCT INFORMATION
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corresponds to the voltage on the rating plate.
Fig. A.
1. Handle
2. Spindle lock
3. On/off switch
4. Depth of cut adjusting knob
5. Mains lead
6. Riving knife
7. Blade guard
8. Socket-head screw
9. Shoe
10. Flange
11. Saw Blade
12. Parallel stop
13. Parallel guide adjusting knob
14. Cutting angle adjustingknob
PACKAGE CONTENTS
Circular saw
Cam key
Socket-head wrench
TCT Saw blade Ø 140 mm
Side guide
Check first whether or not the delivery has been damaged
by transport and/or whether all the parts are present.
66
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Push
Push
The machine is double insulated in accordance
with EN50144; therefore no earth wire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm2. When using a cable reel always unwind the
reel completely.
BEFORE USING THE CIRCULAR SAW:
1. Check the following points:
- do the voltage of the motor correspond to the
mains voltage (appliances for a mains voltage of
230 V
- are the mains lead and the mains plug in a good
condition: solid, without any loose ends or
damage;
- if the saw blade is missing any teeth, or if it shows
any cracks, it must be replaced immediately.
- Make sure the blade is secure.
- Use this circular saw to saw only wood, wood-like
products.
2. Do not use circular saw blades wich are deformed or
damaged.
3