Download SBM 55-55s

Transcript
ITALIANO
ENGLISH
FRANÇAIS
AVVERTENZE
WARNINGS
AVERTISSEMENTS
Il presente libretto di istruzioni costituisce parte integrante del prodotto. Leggere attentamente le
avvertenze e le istruzioni in esso contenute in quanto forniscono importanti indicazioni riguardanti la
sicurezza d’ uso e manutenzione.
Conservare con cura questo libretto per ogni ulteriore consultazione.
The present instructions booklet is an integral part of the product. Carefully study the warnings and
instructions contained in it. This information is important for safe use and maintenance.
Conserve this booklet carefully for further consultation.
Ce manuel d’instructions fait partie intégrante du produit. Lire attentivement les avertissements et
les instructions données car elles fournissent d’importantes indications concernant la sécurité
d’emploi et d’entretien.
Conserver avec soin pour toute consultation.
L’ EQUILIBRATRICE SBM 55-55s E’ UNA MACCHINA PROGETTATA E COSTRUITA PER ESSERE
UTILIZZATA QUALE ATTREZZATURA PER L’EQUILIBRATURA DELLE RUOTE DI AUTOVETTURE,
FURGONI E MOTOCICLI.
LA MACCHINA E’ STATA PREVISTA PER FUNZIONARE ENTRO I LIMITI INDICATI NEL PRESENTE
LIBRETTO ED IN ACCORDO ALLE ISTRUZIONI DEL COSTRUTTORE.
La macchina dovrà essere destinata solo all’uso per il quale è stata espressamente concepita. Ogni
altro uso è da considerarsi improprio e quindi irragionevole.
THE WHEEL BALANCER SBM 55-55s IS A MACHINE DESIGNED AND CONSTRUCTED FOR THE
BALANCING OF CAR, VAN, AND MOTORCYCLE WHEELS.
THE MACHINE HAS BEEN DESIGNED TO OPERATE WITHIN THE LIMITS DESCRIBED IN THIS
BOOKLET AND IN ACCORDANCE WITH THE MAKER’S INSTRUCTIONS.
The machine must be used only for the purpose for which it was expressly designed. Any other use is
considered wrong and therefore unacceptable.
The maker cannot be held responsible for eventual damage caused by improper, erroneous, or
unacceptable use.
Il costruttore non può essere considerato responsabile per eventuali danni causati da usi
impropri, erronei ed irragionevoli.
This symbol is used in the present manual to warn the operator of particular risks associated with
the use of the machine.
Questo simbolo viene utilizzato nel presente manuale quando si vuole attirare l’attenzione
dell’operatore su particolari rischi connessi con l’uso della macchina.
INDICE
CONTENTS
L’EQUILIBREUSE SBM 55-55s EST UNE MACHINE CONÇUE ET CONSTRUITE POUR
L’EQUILIBRAGE DES ROUES DE VOITURES, FOURGONS ET MOTOCYCLES.
L’APPAREIL A ÉTÉ PRÉVU POUR FONCTIONNER DANS LES LIMITES INDIQUÉES DANS CE
MANUEL ET SELON LES INSTRUCTIONS DU CONSTRUCTEUR.
L’appareil ne devra être destiné qu’à l’emploi pour lequel il a été proprement conçu. Tout autre emploi
doit être considéré abusif et donc inadmissible.
Le constructeur ne pourra être considéré responsable des éventuels dommages causés à la
suite d’emplois abusifs, fautifs et inadmissibles.
Ce symbole est utilisé dans ce manuel pour attirer l’attention de l’opérateur sur des risques
particuliers dérivant de l’utilisation de la machine.
INDEX
AVVERTENZE GENERALI ............................................................................................................ 2
WARNINGS .................................................................................................................................... 2
AVERTISSEMENTS GENERAUX. ................................................................................................ 2
CARATTERISTICHE TECNICHE .................................................................................................. 4
TECHNICAL FEATURES .............................................................................................................. 4
CARACTERISTIQUES TECHNIQUES ......................................................................................... 5
ACCESSORI IN DOTAZIONE E ACCESSORI A RICHIESTA ...................................................... 6
ACCESSORIES INCLUDED AND ACCESSORIES AVAILABLE ON REQUEST ....................... 6
ACCESSOIRES EN DOTATION ET ACCESSOIRES SUR DEMANDE ...................................... 7
DISIMBALLO E COLLOCAMENTO .............................................................................................. 8
UNPACKING AND LOCATION ...................................................................................................... 8
DEBALLAGE ET MISE EN PLACE. ............................................................................................. 9
INSTALLAZIONE
- Montaggio carter ......................................................................................................................... 10
- Collegamento elettrico ................................................................................................................ 10
- Installazione flange ..................................................................................................................... 12
INSTALLATION
- Mounting guard ........................................................................................................................... 10
- Electrical connection.. ................................................................................................................ 10
- Flange mounting. ........................................................................................................................ 12
INSTALLATION
- Montage du carter ........................................................................................................................ 11
- Branchement électrique ............................................................................................................... 11
- Installation des plateaux ............................................................................................................. 13
ISTRUZIONI PER L’USO
- Pannello comandi .......................................................................................................................
- Equilibratura Ruote e Controllo equilibratura .............................................................................
- Programmazione per Equilibratura .............................................................................................
- Programmazione e fissaggio pesi adesivi con calibro ...............................................................
- Programmazione di separazione pesi ........................................................................................
- Ottimizzazione squilibbrio ...........................................................................................................
- Configurazione equilibratrice ......................................................................................................
- Taratura base della macchina .....................................................................................................
- Controllo equilibratura ................................................................................................................
- Autodiagnosi ..............................................................................................................................
- Utilizzo programma Easy Aludata ............................................................................................
INSTRUCTIONS FOR USE
- Electronic panel (key) .................................................................................................................
- Wheel balancing and check ........................................................................................................
- Programming for balancing .........................................................................................................
- Programming and mounting adhesive weights with special gauge ............................................
-.Weight separation program. .......................................................................................................
-.Unbalance optimization ..............................................................................................................
-Balancer configuration .................................................................................................................
- Basic calibration of machine .......................................................................................................
- Balancing control ........................................................................................................................
- Self diagnosis ............................................................................................................................
- Using the Easy Aludata program ..............................................................................................
INSTRUCTIONS D’UTILISATION
- Panneau des commandes ..........................................................................................................
- Equilibrage des Roues et Contrôle de l’équilibrage ...................................................................
- Programmation pour l’Equilibrage ..............................................................................................
- Programmation et fixation des masses collantes par pige .........................................................
- Programme de séparation des masses ......................................................................................
- Optimisatioin du balourd .............................................................................................................
- Configuration de l’équilibreuse ...................................................................................................
- Etalonnage de base de la machine ............................................................................................
- Contrôle de l’équilibrage .............................................................................................................
- Autodiagnostic ...........................................................................................................................
- Utilisation du programme Easy Aludata ..................................................................................
14
14
16
18
20
22
24
26
28
30
32
14
14
16
18
20
22
24
26
28
30
32
15
15
17
19
21
23
25
27
29
31
32
MALFUNZIONAMENTI, LORO CAUSE E POSSIBILI RIMEDI. ............................................. 34
MALFUNCTIONING, CAUSES AND TROUBLE-SHOOTING .................................................. 35
ANOMALIES, LEURS CAUSES ET REMEDES POSSIBLES ................................................ 36
MANUTENZIONE ORDINARIA .................................................................................................. 40
ROUTINE MAINTENANCE ......................................................................................................... 40
ENTRETIEN COURANT ............................................................................................................. 41
MOVIMENTAZIONE ACCANTONAMENTO ROTTAMAZIONE. ............................................. 40
TRANSPORT, NON-USE AND SCRAPPING ............................................................................. 40
MANUTENTION, MISE DE COTE ET DEMOLITION .............................................................. 41
ASSISTENZA TECNICA E PARTI DI RICAMBIO ..................................................................... 42
TECHNICAL ASSISTANCE AND SPARE PARTS ..................................................................... 42
ASSISTANCE TECHNIQUE ET PIECES DETACHEES ........................................................... 42
COD. 654160 Rev.3
2