Download Mustang
Transcript
MustangISTRUZIONI11-11.Qxd_Layout 1 30/05/13 10:33 Pagina 11 blades coincide with the base of the pin. Place the blade-pin assembled on the shaft of the cup (A5) Place the food in the cup and replace the lid on the cup according to the instructions described above. Start the rotation of the blades by turning the selector (A6). On completion of the processing, place the selector (A6) on the “0” position. Turn the lid in a clockwise direction to remove the safety arm (C3) from the slot of the motor base (A4). Rest the cup on a stable surface before completely removing the lid and retrieving the accessory used. Be careful when handling the blades of the accessory used. Remove the processed food and thoroughly wash the accessories and cup. ACCESSORY (F) mix, beat, amalgamate Assemble the cup as described in the chapter “Using the cut (C)”, insert the accessory with the plastic wings for mixing, beating and amalgamating (F) on the pin (D1) by pushing downwards, so that the base of the latter coincides with the base of the pin. Position the accessory-pin assembled on the shaft of the cup (A5) Place the food in the cup and place the lid on the cup according to the instructions described above. Only to be used for eggs, egg whites, creams, ready-made sauces, mayonnaise, meringues. Never use this accessory (F) for any type of soft or hard dough. Start the rotation by turning the selector (A6). On completion of the processing, place the selector (A6) on the “0” position. Turn the lid in a clockwise direction to remove the safety arm (C3) from the slot of the motor base (A4). Rest the cup on a stable surface before completely removing the lid and retrieving the accessory used. Remove the processed food and thoroughly wash the accessories and cup. CLEANING IMPORTANT: Do not wash the motor base in water or a dishwasher, but only use a damp cloth after disconnecting the power cord from the electricity outlet. IMPORTANT: Carefully handle the blades during cleaning since they are extremely sharp. Cleaning the cup, jug and accessories. Separate the accessories from the cup and jug. Rinse the lids, jug, cup and accessories under running water. Dry thoroughly before replacing. TECHNICAL DATA 230 V~ 50/60 Hz. 600 Watts Safety lids 2 speed selector: 1, LOW speed 2, HIGH speed “Pulse” function 11