Download DDF446 DDF456

ENGLISH (Original instructions)
Explanation of general view
1.
2.
3.
4.
5.
6.
7.
8.
9.
Red indicator
Button
Battery cartridge
Star marking
Indicator lamps
Check button
Switch trigger
Lamp
Reversing switch lever
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
Speed change lever
Adjusting ring
Graduation
Arrow
Sleeve
Groove
Hook
Screw
Bit holder
Bit
Limit mark
Rear cover
Recessed part
Spring
Arm
Carbon brush cap
Hole
Carbon brush cap
SPECIFICATIONS
Model
Capacities
No load speed
(min-1)
DDF446
DDF456
Steel
13 mm
13 mm
Wood
38 mm
38 mm
Wood screw
6 mm x 75 mm
10 mm x 89 mm
Machine screw
M6
M6
High (2)
0 - 1,500
0 - 1,500
Low (1)
Overall length
0 - 400
0 - 400
192 mm
192 mm
Net weight
1.5 kg
1.7 kg
Battery cartridge
BL1415/
BL1415N
BL1430/ BL1440/
BL1450
Rated voltage
D.C. 14.4 V
1.5 kg
1.7 kg
BL1830/ BL1840/
BL1815/ BL1815N/
BL1840B/ BL1850/
BL1820/ BL1820B
BL1850B
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE034-1
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
3.
GEB088-1
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
4.
5.
6.
7.
8.
9.
metal parts of the power tool “live” and could give the
operator an electric shock.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
“live” wire may make exposed metal parts of the
power tool “live” and could give the operator an
electric shock.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Hold the tool firmly.
Keep hands away from rotating parts.
Do not leave the tool running. Operate the tool
only when hand-held.
Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
5