Download LINEMICRO_ma_2011

UNO
R
To replace the internal lamp, please operate as follows:
• Disconnect the appliance from the power supply system and let it cool down.
• Remove the lateral supports.
• Unscrew the glass cover and replace the lamp with one
with the same characteristics.
• Screw the glass cover back in.
• Reassemble the lateral supports.
2.2REFITOFTHESAFETYTHERMOSTAT
The appliance is equipped with a safety thermostat with
manual recovery. This safety thermostat is needed to protect the appliance from overheating. In case it is needed,
it turns the appliance off.
This safety thermostat can be reached removing the black
cap you find on the bottom part of the back of the oven:
in case you need to refit it, push the key you have in the
center of the thermostat so that it starts working again.
3.MOREFREQUENTBREAKDOWNS
3.
MORE
BREAKDOWNS
FREQUENT
BREAKDOWN
The oven is completely turned
off
CAUSE
SOLUTION
CAUSE
SOLUTION
The tension of the electrical Restore the tension
system is missing
Safety thermostat intervention Refit the safety thermostat
The connection to the electrical
system not made in the correct
way
There is water coming out of Damaged door basket
the cavity from the door
gasket, even though the door Loosened door mechanism
is closed
Burnt lamp
The oven light (if present) does
Loosened lamp
not turn on
The cooking results are even
Control the connection of the
appliance to the electrical
system
Contact
a
specialized
technician for reparation
Contact
a
specialized
technician for reparation
Substitute
Sostituirethe
lalamp
lampadina
Fix
the lamp
the lamp holder
cor- la
Inserire
in inmaniera
corretta
rectly
lampadina nel portalampade
The fans do not reverse the Contact
a
specialized
rotating direction
technician for reparation
One of the fans do not work (in Contact
a
specialized
case that you have an oven technician for reparation
with more than one motor)
The heating element is broken Contact
a
specialized
technician for reparation
ENGLISH
LINEMICRO ma 2011
6
7