Download starten

3. Mounting
CAUTION: Several switches require setting before operation of this product, as described in configuration, page 31. An incorrect setting may result in
damage to this unit and to any other device(s) connected to it.
3.1 Mounting bracket, standard
Attach the base plate to the selected mounting bracket or pedestal using four M6 hex head screws (included), washers and nuts.
NOTE: A cardboard mounting disc is provided with the VPT-651 to hold the mounting bolts in place during installation.
Weatherproofed housing
Pan/Tilt head
Power supply unit
Cardboard mounting disc (remove after tightening nuts on mounting fixture.)
Four M6 hex head screws
Base mounting plate
Four washers and nuts
Mounting pedestal/column
25