Download Untitled - DemacLenko

Perform maintenance work only when the SG is shut down.
DEMACLENKO is not responsible for damage caused by
improper maintenance or negligence. All safety devices must be
stored after maintenance. DEMACLENKO is not responsible for
damages caused by removal of safety devices
Maintenance operations must be performed by qualified personnel using appropriate
maintenance tools. The SG must be switched off and without electricity. The electric
panel maintenance can be carried out only by qualified electricians. The wiring diagram
of the SG cannot be changed in any way.
ATTENTION!
For maintenance work
manufacturer’s manual
on
the
compressor
consult
it
10.1
ITALIANO
Maintenance is divided into 3 intervals, described below:
1. Maintenance after each use
2. Periodic maintenance
3. Annual maintenance
MAINTENANCE AFTER USE

Remove snow and ice from the SG

Check the spray-cone of the nozzles and the nucleators

Check the seals on the nozzle head (to prevent accumulation of water or ice)

Check the coating of all water and air pipes. Replace if necessary

Check all cables for breaks or cracks
ATTENTION!
ENGLISH
ATTENTION!
MAINTENACE OF THE SG
DEUTSCH
10.
Make sure that the electric cabinet is always closed!
17