Download ITHK 800

GB | Operating Instructions
Telescopic pole pruner & hedge trimmer (2 in 1) ITHK 800
TECHNICAL SPECIFICATIONS
Model
ITKS 800
ITHS 800
Operating voltage
V~
230-240
230-240
Nominal frequency
Hz
50
50
Nominal power consumption
W
800
800
Idle speed n0
min-1
9000
1700
Cutting length
mm
200
410
Cutting capacity
mm
Saw chain
18
91P033X
Guide plate
080NDEA041
Weight without cable
kg
4,5
Noise pressure level
dB (A)
86
5,0
Vibration
m/s2
4,5 m/s2 K 1,5 m/s2 1)
K 3,0 dB(A) 1)
86
K 3,0 dB(A) 2)
4,5 m/s2
K 1,5 m/s2 2)
1) EN ISO 11680-1:2011
2) EN ISO 10517:2009
WARNING: When in operation, the tool‘s actual vibration emissions value can deviate from the specified value depending on how the tool is used, as in the following examples or because it is used in another way:
-- How the tool is being used and which materials are being cut.
-- The tool is well maintained and in good working order. The correct accessories are being used and care has been
taken to make sure they are sharp and in good working order.
-- How secure the hand grip is and whether anti-vibration accessories are being used.
-- Whether the tool is being used in accordance with its design and as specified in these instructions.
-- The tool can cause hand-arm vibration syndrome symptoms if it is not used properly.
WARNING: To make sure, an assessment should be made of the strain exerted when the tool is in use, for example
when the tool is switched off or is idling. This will make it possible to significantly reduce the strain exerted during the
entire time the tool is in use.
-- Minimise your risks if the tool vibrates.
-- Take care of the tool as specified in these instructions and make sure the tool is properly lubricated (if necessary).
-- If you use this tool regularly, you should invest in anti-vibration accessories.
-- If the temperature is 10°C or less, do not use the tools. Prepare a work schedule so that work is distributed over
several days when using tools that exert high vibrations.
GB-4