Download Untitled

English
*If powder adheres to the O-ring section, remove
the O-rings, and carefully clean the O-rings and
grooves. (Fig. 18)
Fig. 18
2) Remove the Rubber Packing and disassemble
the Powder Case Cap. (Fig. 19)
Rubber Packing
Fig. 19
3) Wash away the Perio Mate Powder adhering
to the inside of the Powder Case/Powder Case
Cap under running water. (Fig. 20)
4) Blow water off the Powder Case Cover, Rubber
Packing, and the Cover Holder by air and dry.
Then, assemble.
Fig. 20
Ř If cleaning powder remains in the Powder Case, powder will solidify, and clogging may
occur.
CAUTION
Ř Do not immerse the Powder Case or the Handpiece, with residual powder, into water.
The powder will solidify, and clogging may occur.
13