Download PS 5000 A Serie

PS 5000 A Series
1.9
Construction and function
1.9.1
General description
The electronic DC laboratory power supplies of the PS 5000 A series are especially suitable for laboratories, workshops, school and other educational facilities due to their compact construction in a desktop enclosure.
For remote control using a PC or PLC the devices are provided as standard with a USB slot on the rear side. The
interface are galvanically isolated from the DC output.
Series or parallel connection are possible. The DC output clamps on the front are suitable to connect soldered
cable ends, spade lugs, cable end sleeves or 4mm Büschel plugs.
All models are controlled by microprocessors. These enable an exact and fast measurement and display of actual
values.
1.9.2
Scope of delivery
1 x Power supply device
1 x 1.5 m power cord
1 x Printed operating guide
1 x 1.8 m USB cable
1 x CD “Drivers & Tools“
1.9.3
Accessories
For these devices the following accessories are available:
Safety adapters
Art. no.: 10900114
Set of safety adapters (1x red, 1x black, gold covered, max. 32 A) for
later mechanical installation onto the front side DC output connectors, in
order to make them not exposed to touch. The adapters are supposed
to receive 4mm safety plugs (normal or isolated).
19” mounting frame Set with a 19” mounting frame in 3U to install up to two units of PS 5000 side by side in
Art. no.: upon request 19” cabinets, racks or similar. Available 3rd quarter of 2014.
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[email protected]
Page 17