Download MSA PLUS 400

Operating instructions MSA Plus 400
4.8
4 Configuration
Traceability Z44
This feature allows the user of the fusion set to enter additional information
regarding the components being used ( ISO 12176-4 norm). The data may be
entered either by means of a barcode or by the MSA Plus 400 keypad,
whereas an authorized person defines, using a configuration barcode, which
additional information must be entered. The configuration barcode is generated
by the program MSA WIN-WELD.
The additional information will be stored, together with all other relevant data,
following the fusion process (see chapter 3.5) .
Display when Fitting active:
TRACEABILITY
DATA:
FITTING?
S MNU
T MNU
W LFT
MSA Plus 400
GB
14:20
03-06-2007
X EDT
ENT
Display when element 1 or element 2 active:
TRACEABILITY
DATA:
ELEMENT 1?
S MNU
T MNU
W LFT
MSA Plus 400
GB
14:20
03-06-2007
32mm
X EDT
ENT
LENGTH:
ELEMENT 1?
000.00 m
S MNU
T MNU
MSA Plus 400
W LFT
X EDT
ENT
GB
14:20
03-06-2007
32mm
32mm/100mm
Skipping an input:
Using the ENTER-key , barcode or keyboard data input can be skipped.
Subsequently, the next display indication will be shown (The skipping feature
may be disabled via the configuration menu).
Manual entry:
Using the RIGHT-key, the edit mode is selected; you may now manually enter
data (The manual entry feature may be disabled via the configuration menu).
Manual input of barcode data :
FITTING?
3736030321999140
5705030314
S UP
T DWN
W LFT
MSA Plus 400
GB
14:20
03-06-2007
X RGT
ENT
(10.07) MSA Plus 400_e.doc
21