Download operation manual

ENGLISH
OPERATION MANUAL
ASIO-drivers:
If you absolutely want to have extremely low latency (delay), you can also experiment with ASIO-drivers if
you like: in that case you can select “ASIOdriver” for the soundcard. Since this is out of
the scope of this manual, we will not explain
the configuration of the ASIO-drivers here.
USING OTHER DJ-SOFTWARE
Since this controller is designed as a MIDI-compatible device, you can use it to control any Midi DJ-software.
Of course this means that you will need special MIDI-mapping files for these products. Please check our
website: we will provide MIDI-mapping files for some other DJ-software free of charge.
VIRTUALDJ TUTORIALS
VirtualDJ is a very intuitive program so you will easily learn it while trying all possibilities. If you want to learn
more, please check the VirtualDJ website for video tutorials and extra user guides:
www.virtualdj.com/wiki/index.html .
SETUP MENU
For maximum flexibility this unit is highly customizable. Therefore a lot of parameters can be set via the
setup menu. To be able to enter the setup menu, the player should NOT be in MIDI mode.
 To enter the SETUP menu, press the LOAD TRACK button (19) for about 3seconds.
 Use the FOLDER knob (16) to browse the different menu options.
 Use the TRACK knob (17) to browse the sub menus (if any)
 Use the JOG WHEEL (22) to change the settings (parameters) of the selected menu option.
To save your settings: choose menu option E (EXIT & SAVE) and press the TRACK knob (17) or
press the RECORD CUE button (25).
1. MIDI CHANNEL: used to set the MIDI-channels of the 3 different parts of the DMC2000. The display
shows 3 groups of 2 digits: 01-02-03:
 First 2 digits: MIDI-channel for the controls of player1 + channel1 of the mixer.
 Second 2 digits: MIDI-channel for the controls of the mixer, except the controls of the 2 input
channels (gain+high/mid/low+fader)
 Third 2 digits: MIDI-channel for the controls of player2 + channel2 of the mixer.
 Turn the TRACK knob (17) to browse the three 2digit groups
 Turn the JOG WHEEL (22) to change the MIDI-channel.
Note: the 3 parts should have different MIDI-channels.
2. MIDI SETUP:
 There are 2 submenus: turn the TRACK knob (17) to select a submenu.
o Submenu 1 – SHIFT button (43) functionality: you can choose how the SHIFT-button
works in MIDI-mode.
 Turn the JOG WHEEL (22) to select the desired setting:
 TAP = HOLD: similar to the SHIFT-key on your PC-keyboard  the MIDIcode of a button/knob changes only when you use it while the SHIFT-button
(43) is pressed.
 TAP = TOGGLE : similar to the CAPS LOCK-key on your PC-keyboard 
press the SHIFT-button (43) to turn the shift-function on: as long as the
display shows “SHIFT” the MIDI-code of most buttons/knobs changes so
they get a second (double) function.
o Submenu 2 – MIDI message display: you can select if the MIDI I/O messages should
appear on the display or not. This can be helpful while making MIDI configuration files.
 Turn the JOG WHEEL (22) to select the desired setting:
 I/O = Hide : don’t show MIDI messages that are sent / received
 I/O = DIS. : show MIDI messages that are sent / received
3. MIXER-mode: used to switch the mixer between MIDI and non-MIDI mode.
 Turn the JOG WHEEL (22) to select the desired setting:
SYNQ®
14/107
DMC2000