Download Car Kit Bluetooth

4
Car Kit Bluetooth (en)
Direct installation of the display
First clean the area where you
want to attach the display 6 using a suitable grease-dissolving
cleaning agent. The adhesive
pad will only adhere permanently to a grease-free surface.
Mount the display 6 using the
adhesive pads.
Installation using the display holder
Mount the display holder 7 onto the dashboard with the adhesive pad supplied or with appropriate screws*.
Then press the display 6 into
the display holder 7 until it
clicks into place.
Loudspeaker
The inclination and the rotation
of the loudspeaker 8 can be
adjusted. Loosen the set
screw in the base, install the
loudspeaker 8 and tighten
the screw.
* Not included in the Siemens standard
scope of supply.
Secure the loudspeaker 8 in a
suitable location (such as the
passenger-side footwell).
The screws can be found in the
base of the loudspeaker 8.
Wiring loom
Electrical connections
When connecting the Car Kit to
the wiring loom 3 ensure that
the function and operation of
other devices are not compromised (e.g. voltage drop).
Disconnect the car battery correctly before installing the wiring loom 3 and the electronics
box 1.
Connect the §B§ 12V+ line (red)
to the positive terminal of the
car battery.
Connect the §D§ line (brown) to
the negative terminal of the
car battery.