Download Installation Guide AXIS P8221

AXIS P8221 Installation Guide
Page 3
AXIS P8221
Installation Guide
This installation guide provides instructions for installing an AXIS P8221 Network I/O Audio Module
on your network. For all other aspects of using the product, please see the User’s Manual, available
on the CD included in this package, or from www.axis.com
Follow these steps to install AXIS P8221 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
Important!
This product must be used in
compliance with local laws and
regulations.
Package contents
Item
Models/variants/notes
Network I/O Audio Module
AXIS P8221
Indoor power supply
(country specific)
Europe/UK, Australia, USA/Japan, Argentina, Korea
Terminal block connectors
•
•
•
•
Mounting kit
• 2 screws and plugs to mount the device to a concrete wall
• 4 surface protection pads
CD
AXIS Network Video Product CD, including product documentation, installation
tools and other software
Printed Materials
AXIS P8221 Network I/O Audio Module Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Audio: 5-pin connector
I/O: Two 6-pin connectors
Power: 3-pin connector
RS-232/485/422: 5-pin connector
ENGLISH
Installation steps