Download RENLIG

ENGLISH
21
• close the filter
cover;
• insert the mains
plug again.
• remove the filter and clean it under the
tap;
• if necessary,
place the filter
cover in the right
position again.
• open the filter
cover and insert
the filter again;
Cleaning the water inlet filters
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
light blinks in red. Check if the water inlet filters are blocked (see chapter "What to do
if..." for more details).
Proceed as follows:
1
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a
stiff brush.
• Screw firmly the
inlet hose back
onto the tap.
2
The filter is inserted correctly when the
indicator on its top is visible and
blocked.
• Unscrew the hose from the appliance.
Keep a rag nearby because some water may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.