Download PeakTech_9015

6.1.7 Upgrade function
In the multimedia menu you can find the upgrade
function for your PeakTech® 9015, which can be used to
exchange transponder lists with personal computers or
for firmware upgrades. This function should only be
used cautiously, because a wrong operation may
damage the device, which is excluded from any
warranty.
How to use the update function:

Copy the required update files on a USB flash drive and connect it to the meter.

The User Database (256kB), the DefaultDatabase (128 Kbytes) or the firmware (~ 3.6
MB) can be updatet.

Start the device and select the function UPGRADE from the multimedia menu.

Userdb: To upgrade the User Database, select an appropriate file (eg: userdb.img)
from the USB-drive with the arrow keys and press the OK button. The update file is
transferred to the internal memory and the device automatically restarts after a few
seconds. To edit the Userdb, you can copy this file to the USB-device with pressing
the F1 key.

Defaultdb: To upgrade the Default Database, select an appropriate file (eg:
defaultdb.img) from the USB-drive with the arrow keys and press the OK button. The
update file is transferred to the internal memory and the device automatically restarts
after a few seconds. To edit the defaultdb, you can copy this file to the USB-device
with pressing the F2 key.
Note:

Do not turn the unit off during an update process.

Incorrect use of these functions can lead to damage of the unit, which is excluded
from any liability claims.
6.1.8 System Settings
The System menu provides a variety of settings and information. Also you can make special
setting which allow you to use the satellite alignment help.
-42-