Download Abschnitt I

Technical
Model
ACT-4, ACT-8, 20K,
MP-8000.
Date
Bulletin n°
2009-10-21
U-G-0011-A
FRACO
It is possible to proceed with lifting operations of up to 15 000 pounds (6804 Kg) by using
the method described in Steps 1 through 3, on the following pages of the present document.
The lifting capacity of 15,000 pounds (6804 Kg.), is valid only if the load being lifted remains
in a vertical position at all times.
Maximum weight of assembly: 15 000 pounds (6804 Kg).
Important:
1.
2.
3.
4.
5.
This method is applicable for the ACT-4, ACT-8, 20K and MP-8000 (Transporter)
Any installation or dismantling operation of FRACO equipment must be performed by
a certified installer (level 2A or 2B).
It is the responsibility of the person in charge of the lifting operation to verify the
combined weight of all components of the assembly that are to be lifted (please refer
to your user’s manual or Fraco representative).
A competent person must perform all lifting operations.
It is the responsibility of the person in charge of lifting operation to ensure that:
5.1
The equipment used for lifting operation (crane, slings, chains or straps, etc.)
has the required lifting capacity;
5.2
The working methods used comply with all local rules and regulation currently
in effect.
2001© Les Produits FRACO Products ltée/Ltd.
2/4