Download Installationsanleitung

Transcript
Network Switch
Ethernet
Patch
Cable
Weidmüller Plug
Pin 1
+ DC In
Gnd
11. Insert the Weidmüller plug into the terminal connector on the back of the
camera.
12. Plug in or switch on the power supply.
13. Go on to Section 2.2 on page 10.
GEUTEBRÜCK TopLine cameras
9
Language Language Language Language Language Language Language
10. Connect an Ethernet cable to the RJ-45 connector on the camera and to
your network switch as shown below.
English
Installation Guide